How big is the capacity of automatic chip line?
Many factories on automatic potato chips/Frozen Fries production line configuration and application questions?
The input weight of raw materials and the output capacity of finished products should be taken as reference, and the production capacity of quick-frozen French fry line should be taken as its own demand.
Flow chart of automatic frozen French fries production line:
For example, potatoes are used as raw materials, and the inside of potatoes contains water and starch, so half of the customized production lines take the weight of the processed raw materials as a reference to customize the French fries production line plan. If the weight of the finished product is used as a reference for the final production capacity, it can also be customized.
Then the French fries/potato chips have a high moisture content before being fried. After high-temperature frying, the water completely evaporates, and the finished product no longer contains moisture, so the finished French fries and potato chips are lighter in weight.
Question case 1: Can the estimated production capacity of potato chips and potato chips be reached?
Answer: Our French fries quick-frozen production line can customize the size of each stand-alone machine according to your needs, and can meet your production requirements. At the same time, each stand-alone machine is equipped with a variable-frequency motor that can be adjusted independently, so there is no need to worry about the production process speed.
Case question 2: What heating method is used in the blanching machine and continuous fryer during frying French fries and potato chips?
Answer: According to your local heating energy as a reference, if your local electricity bill is relatively high (for example, each kilowatt-hour of electricity is higher than 0.2USD/degree), do not use electric heating.
The water heating method of the blanching machine adopts steam heating, which can maintain the largest heat source utilization. The heating method of the steam generator can be gas/natural gas/electricity.
The frying heating method uses gas pipeline heating, and we have equipped the machine with a complete set of burners.
Case question 3: The choice of edible oil for fried French fries and potato chips, and the capacity of edible oil input.
Answer: If you consider the cost for frying, you can choose salad oil/palm oil or soybean oil. The cost of soybean oil is high, so it depends on personal choice.
The input amount of edible oil depends on the length of each type of frying machine, and the capacity is different. Therefore, the input amount of oil is subject to the submerged full-automatic frying machine.
Case question 4: How long is the oil recycling?
Answer: We will store and circulate the frying edible oil according to different automatic frying configuration oil tanks. The process requirements are more detailed and the frying filter can be configured to filter the circulating edible oil well.
Case question 5: Why is the configuration of the French Fries Quick Freezer not a traditional tunnel type?
Answer: The traditional chain tunnel quick-freezing machine can only enter the quick-freezing machine according to the product placement state when the material is fed. After the material is fed, the distribution is uneven and there are adhesions. The French fries products are squeezed in the tunnel at low temperature and quick-freeze.
If the production capacity of the fries line is too large, the fries will be discharged by quick-freezing with adhesion, so this effect is not good.
We have a mature quick-frozen French fries production line plan, which can better solve the existence of such problems and can discharge the finished products well, so please do not use the traditional quick-freezing line to compare with our exclusive plan.
We can complete the customization of your needs:Automatic frozen potato chip production line capacity size customization.
WhatsApp 86 152 4967 4563
Emai:sale@frenchfriesline.com
More Website: www.frenchfriesline.com